Regulated Pneumatic Filter Lubricator FM-50
- This Item: £318.00 £265.00
- Beeswift Pu Coated Gloves £3.59 £2.99
- Beeswift Vegas Safety Glasses Clear £2.58 £2.15
Product Information
Pneumatic Filter
Pneumatic Filter with housing and semi automatic drain for air preparation systems, capable of removing particulates up to 25µm.
Used to eliminate dust, solid particles, water vapour particles, oil vapours, etc from the compressed air. In the bottom of the filter bowl there is a device which is used to drain the water/oil and particulates which have been extracted from the air.
- Model: FM-50-06-F / 3/4" Port Size
- Maximum supply pressure: 220 PSI
- Operating pressure: 140 PSI, regulating range 5 - 120 PSI
- Ambient temperature range: -10° -to- +60°
- Available sizes: 1/8" (500 l/min) up to 1" (5000 l/min)
- Filter precision: 25µm as standard
- Polycarbonate bowl
- Zinc, metal bowl guard
- Screwed BSPP
Pneumatic Lubricator
Pneumatic Lubricator with housing for air preparation systems - easy to adjust, fill and maintain. A fully automatic nebulising oil lubricator with built-in sight glass level indicator.
Normally pneumatic equipment does not require additional lubrication. However in specific conditions where lubrication is needed this lubricator bowl is used. Filled with oil, air is passed through the lubricator where it automatically nebulises the oil via a venturi, which deposits the oil at pre-determined levels. The lubricator should be ideally mounted as close as possible to the components which require lubrication.
- Model: FM-50-06-L / 3/4" Port Size
- Maximum supply pressure: 220 PSI
- Operating pressure: 140 PSI, regulating range 5 - 120 PSI
- Ambient temperature range: -10° -to- +60°
- Available sizes: 1/8" (500 l/min) up to 1" (5000 l/min)
- Recommended oil: 5-10 Weight Hydraulic Oil
- Polycarbonate bowl
- Zinc, metal bowl guard